Thanks to the amazing developer at the biggest Android forum XDA, you can find almost everything you need for your Android device. This time I wrote the guide to easily unlock bootloader on LG G3 Stylus. The procedure is not hard and no special requirements or knowledge is needed.
LG G3 Stylus is made for all those LG lovers that can’t afford buying a new LG G3. LG G3 will look the same as the LG G3, but it has not the specs of LG G3 but it still is one of the best phone you can find around. You are here because you have bought an LG G3 Stylus. So go ahead and Unlock Bootloader on LG G3 Stylus.
Note: I am not Responsible if anything goes wrong. Here we provide the files and the step by step tutorial. Usually guides provided at DoryLabs are tested and safe but things can happen. So be carefully to follow the guide step by step and don’t skip anything. Do it at your own risk and if anything goes wrong don’t put the finger on me.
- This tutorial is only for LG G3 Stylus. Don’t try it on other devices because it might result in phone bricking.
- Always make a backup before doing such actions. I recommend to do a Nandroid backup because it will create a full copy of your system.
- Make sure your device is charged at least 60% so it will not shut down during the process.
- Enable USB Debugging under Options.
Unlocking Boot loader on LG G3 Stylus requires ADT with all the packages installed an configured. You can download ADT with all its packages from the link above. Install it and make all the configuration properly.
Download Modaco Superboot file on your computer from the link above and extract it until you find a folder with fastboot-windows inside it.
Then find any blank area on you computer and holding down shift button, right click on the blank area and select “Open Command Window Here”
A command Prompt Window will open and you have to type the following code:
adb-windows reboot bootloader
Press Enter and wait for your phone to restart. Then type the following code:
fastboot-windows oem unlock
Presw Enter and wait for your phone. A window will appear asking you if you are sure. Hit yes using the Volume buttons. The device will go again to bootloader screen and you will see Unlocked at the bottom.
Sometimes it might happen that it gets stuck waiting for the device here. In this case you have to download PDANet on your computer. Install it and then unplug and plug it back. The problem should be fixed now.
You have succefully unlocked bootloader on your device. The Next step is to Root LG G3 Stylus.